Hi,
I am using the Sodaq U-Blox SARA R410M board and switch to the T-Mobile network using the boot menu. After I switch to Telco (tmobile=0) the configuration below showed up. According to the documentation this should be fine. However, I always get the message below:
AT+CPIN?
READY
rdResp: OK
Could not connect to the network
Any ideas what I could try? Could it be that I have no coverage?
Telco (tmobile=0, vf-n=1, vf-m=2, kpn=3, mono=4) (tlc=): 0
Upload Interval (min) (sri=): 5
GPS Fix Timeout (sec) (gft=): 120
Minimum sat count (sat=): 6
APN (apn=): cdp.iot.t-mobile.nl
Force Operator (opr=): 20416
Network (LTE-M=7, NB-Iot=8, 2G=9) (rat=): 8
Band Mask (bnm=): 524288
Server URL/IP (url=): 172.27.131.100
Server port (prt=): 15683
Send ATT header (OFF=0 / ON=1) (ahd=): 0
All Things Talk Token (att=): pif97GYa
Payload type (0=cbor, 1=hex, 2=json) (pld=): 0
Temperature offset (tof=): 0
GPS (OFF=0 / ON=1) (gps=): 1
Debug (OFF=0 / ON=1) (dbg=): 1
On-the-move Functionality
Acceleration% (100% = 8g) (acc=): 25
Acceleration Duration (acd=): 0
Accelerator Trigger
Sensitivity (1-50) (act=): 10
Back-off time (sec) (bot=): 10